Fundamentals of Engineering
Program ID: ELEC 1001P
Program type: Short Courses (weekday), Evening and Weekend Course, Online e-course
CEUs: 4.2 |
Location/ (Accommodations) |
Program Administrator |
Start |
End |
Status |
Cost |
Online Course (No hotel required.) |
Dr. Russ Callen |
Online e-course |  |
$875.00 |
Section ID: 10340/Online
This is a self-paced online course that is available from January 20, 2010 to April 30, 2010.
Last day to register: April 1, 2010
You will be sent course materials and provided online access instructions after your registration has been processed. Call 404-385-3543 with any questions.
NOTE: This course was recorded from a previous live offering and has been made available for online delivery.
|
Meeting time(s): Wednesday, January 20, 2010 (12:00 AM-12:00 AM)
Friday, April 30, 2010 (12:00 AM-12:00 AM)
|
Blended Delivery (Live & Online) (No hotel required.) |
Dr. Russ Callen |
February 3, 2010 |
March 22, 2010 |
 |
$875.00 |
Section ID: 10250/220410390
On the first day, check in at least 30 minutes before the class start time. Meeting time(s): Wednesday, February 3, 2010 (6:30 PM-9:30 PM)
Monday, February 8, 2010 (6:30 PM-9:30 PM)
Wednesday, February 10, 2010 (6:30 PM-9:30 PM)
Monday, February 15, 2010 (6:30 PM-9:30 PM)
Wednesday, February 17, 2010 (6:30 PM-9:30 PM)
Monday, February 22, 2010 (6:30 PM-9:30 PM)
Wednesday, February 24, 2010 (6:30 PM-9:30 PM)
Monday, March 1, 2010 (6:30 PM-9:30 PM)
Wednesday, March 3, 2010 (6:30 PM-9:30 PM)
Monday, March 8, 2010 (6:30 PM-9:30 PM)
Wednesday, March 10, 2010 (6:30 PM-9:30 PM)
Monday, March 15, 2010 (6:30 PM-9:30 PM)
Wednesday, March 17, 2010 (6:30 PM-9:30 PM)
Monday, March 22, 2010 (6:30 PM-9:30 PM)
|
Online Course (No hotel required.) |
Dr. Russ Callen |
Online e-course |  |
$875.00 |
Section ID: 10341/Online
This is a self-paced online course that is available from August 18, 2010 to November 13, 2010.
Last day to register: October 15, 2010
You will be sent course materials and provided online access instructions after your registration has been processed. Call 404-385-3543 with any questions.
NOTE: This course was recorded from a previous live offering and has been made available for online delivery.
|
Meeting time(s): Wednesday, August 18, 2010 (12:00 AM-12:00 AM)
Saturday, November 13, 2010 (12:00 AM-12:00 AM)
|
Blended Delivery (Live & Online) (No hotel required.) |
Dr. Russ Callen |
September 1, 2010 |
October 20, 2010 |
 |
$875.00 |
Section ID: 10251/220411099
| There will be no class on Monday, Sept 6th - Labor Day
|
On the first day, check in at least 30 minutes before the class start time. Meeting time(s): Wednesday, September 1, 2010 (6:30 PM-9:30 PM)
Wednesday, September 8, 2010 (6:30 PM-9:30 PM)
Monday, September 13, 2010 (6:30 PM-9:30 PM)
Wednesday, September 15, 2010 (6:30 PM-9:30 PM)
Monday, September 20, 2010 (6:30 PM-9:30 PM)
Wednesday, September 22, 2010 (6:30 PM-9:30 PM)
Monday, September 27, 2010 (6:30 PM-9:30 PM)
Wednesday, September 29, 2010 (6:30 PM-9:30 PM)
Monday, October 4, 2010 (6:30 PM-9:30 PM)
Wednesday, October 6, 2010 (6:30 PM-9:30 PM)
Monday, October 11, 2010 (6:30 PM-9:30 PM)
Wednesday, October 13, 2010 (6:30 PM-9:30 PM)
Monday, October 18, 2010 (6:30 PM-9:30 PM)
Wednesday, October 20, 2010 (6:30 PM-9:30 PM)
|
|
Course Description
This course in the fundamentals of science and engineering is designed to help those persons planning to take the Fundamentals of Engineering Examination (formerly the EIT Exam). This course is tailored for the "General" option of the FE exam. For those students desiring a discipline-specific review, six additional hours of instruction will be offered in the disciplines of electrical and mechanical engineering, if there is sufficient demand. You must be enrolled in this course prior to taking the discipline-specific review.
The course is taught in the form of a general review, with emphasis on the most essential theories and methods. The course material is not limited to the subject matter covered by the Fundamentals of Engineering Examination.
The class meets on the Georgia Tech campus on Monday and Wednesday evenings. Each class is held from 6:30 p.m. to 9:30 p.m. For review purposes, students will also be allowed access to an online version of a previously delivered course.
Course Topics
The following subjects are reviewed:
- Chemistrygeneral inorganic
- Dynamics
- Electrical Theory
- Engineering Economy
- Fluid Mechanics
- Materials Science
- Mathematicsalgebra through calculus
- Mechanicsstrength of materials
- Physicsmechanics
- Statics
- Thermodynamicsheat power
Exam Information
Direct all inquiries regarding the State Professional Engineer's Examination and the Fundamentals of Engineering Examination to:
Georgia State Board of Professional Engineers and Land Surveyors
237 Coliseum Drive
Macon, GA 31217-3858
478-207-2440
Faculty
The principal course instructors are well-qualified in their fields. The full course, sponsored by the School of Electrical and Computer Engineering, consists of approximately 42 hours of instruction. The course administrator is Dr. W. Russell Callen, Jr., P.E., a professor in the School of Electrical and Computer Engineering. He can be reached via e-mail at russ.callen@ece.gatech.edu and by phone at (404) 894-2919.
Online Version Computer System Requirements
Please review the following computer system requirements needed to successfully run this course:
- 500 MHz Intel Pentium III processor or greater (supports simultaneous record/playback features)
- 128MB of RAM
- High-speed Internet connection (audio/video)
- Full Duplex sound card and speakers
- 65,000-color video display card set to display at 800x600 or higher (video)
- Windows 2000 with Service Pack 2 or later, or Windows XP
- Internet Explorer 5.X, except 5.5 Service Pack 1, or 6.0: or
- Netscape 7.0, or 6.2.x Netscape 7.2x browsers will most likely work as well, but they have not been validated against WebCT at this time. Please also note that Netscape 6.0 and 6.1 will not work due to problems in their JavaScript engines.
- You must have Sun Java Virtual Machine version 1.4.1 or higher installed. The Browser Diagnostics Test, located on the course web site, will check for this and will tell you if your version is okay. At this time, we do not recommend the 1.5 version of Java, but rather we suggest the last 1.4 release, 1.4.2.
- Finally, if you are using a pop-up blocker, you must either set your blocker to allow the WebCT site (prod.webct.gatech.edu) or you will need to disable your blocker while using WebCT.
- Adobe Acrobat Reader
- RealPlayer 10 or higher (available for download at ) http://www.real.com
- If using Screen-Reader software: JAWS (v4.02 or greater recommended) or WindowEyes (v4.21 or greater)
Video Teleconferencing
Since people throughout the state are working towards the Fundamentals of Engineering exam, Georgia Tech would like to offer the Fundamentals of Engineering course over the Georgia Statewide Academic and Medical System (GSAMS) two-way audio/two-way video teleconferencing system. The course will actually be conducted on the Georgia Tech campus in Atlanta, but can be simultaneously broadcast to GSAMS sites throughout Georgia.If you are interested in this option and there is sufficient interest in your area, we will make every effort to set up a location near you. Please send your name, address, phone and fax number to the following:
Phyllis Harris
Georgia Tech Professional Education
P.O. Box 93686 Atlanta, GA 30332-0686
phyllis.harris@dlpe.gatech.edu
Fax: (404) 894-0201
|
Related ProgramsElectrical Engineering: Preparation for the PE Exam, Power Option recommended
|
Related linksGeorgia State Board of Professional Engineers and Land Surveyors
School of Electrical and Computer Engineering
|
|